Hoss Quick Connect

The Hoss Quick Connect is easily attached to the bayonet flange of your trailer or fifth wheel for a quick setup, drain and flush at your campsite. The Rigid Hose Adapter rotates 360 degrees and allows you to adjust the angle of your Hoss Quick Connect for easy setup at any elevation. The proprietary aluminum nut allows you to telescope the Hoss Quick Connect so it also adapts to the height of your trailer or fifth wheel. You can also rotate the distal tube, so it fits right on the ground or adjusts to the height of your slinky for any height. When draining your holding tanks the transparent acrylic tube lets you see clearly that the gray water and black tanks have drained completely. After draining the sewer tanks, it is always a hassle to disconnect the fittings and hoses and then flush them with the hose at the campsite. A brass goose neck shut off valve is threaded into the hose adapter to allow you to drain your tanks without any sewage leaking into the fresh water supply. Be sure the shut off valve is in the OFF position when draining your tanks. The Hoss Quick Connect is designed with a Hydro Flush anti-siphon valve and a quick-connect hose adapter that allows you to clean and flush your sewer hoses with fresh water before you break camp. Once everything is flushed clean you can easily disconnect the Hoss Quick Connect from your trailer or fifth wheel. If your Hoss Quick Connect gets a little dirty or stiff you can lubricate the O-ring with WD Forty or a little oil. You should not need to do this very often. Simply put your Hoss Quick Connect in your storage compartment of your trailer or fifth wheel and you will be ready, to get “On the Road Again”, for your next trip. Have Hoss Quick Connect will travel!