Isokinetic Process Sampling Inc

Isokinetic Process Sampling was developed as an entity dedicated to providing the scientific data needed to make sound filtration and separation selection decisions. Isokinetic Process Sampling (IPS) utilizes different testing protocols to measures the many types of contaminant issues found in many pipelines. Filtration and separation equipment selection can be a difficult task. Filtration and separation companies offer numerous “different” contaminants and contaminant mixtures are almost always different. The key to selecting the optimum separation technology for a service is to have real data on the contaminant’s volume, size, and physical characteristics. All too often, filtration and separation equipment is selected, purchased and installed with very little known about the contaminant. The result often produces damaged downstream equipment and or over budget operational cost due to poor performance. IPS was developed as an entity dedicated to providing the scientific data needed to make sound filtration and separation selection decisions. Now a day’s gas turbine and other critical gas systems are extremely sensitive to liquid, liquid aerosol, and solids contamination. Most manufacturers have developed gas cleanliness requirement specifications for fuel and feed gas streams. The IPS “Total Contaminant Sampling & Analysis System”, using different testing protocols, provides the scientific data needed to qualify as streams for use with contaminant sensitive equipment. REASONS TO CHOOSE IPS 1. Don’t need large container for protocols/equipment 2. Don’t need crane to load/unload the container 3. Don’t need truck for shipping the container back and forth 4. No waiting time at customs/border 5. Cut down testing cost 6. Sampling can be done at inlet and outlet at the same time with the same gas 7. Don’t need hot work permit 8. I.P.S is not a sales tool, it is a totally independent company, provides total solutions and recommendations to your problems OUR SPECIALTIES Process Sampling & Analysis Coalescer Contaminant Sampling (CCS) Solid Contaminant Sampling (SCS) Total Suspended Solids Sampling IPS PROTOCOLS AND METHODOLOGY In order to perform the required analysis, the Coalescer Contaminant Sampling (CCS), the Solids Contaminant Sampling (SCS) and Total Suspended Solid Sampling testing protocols will be used. The CCS, SCS and protocols will provide a complete 360 degree picture of the size and content of the process pipeline’s contaminants.